Ultrapure Water
Ultra Pure Water Systems
Multi-stage polishing trains combining RO, EDI and mixed-bed ion exchange for applications with no tolerance for excursion.
- Resistivity
- Up to 18.2 MΩ·cm
- Technology
- RO · EDI · Mixed-bed polishing
- TOC control
- < 5 ppb typical
- Sectors
- Semicon · Pharma · Power
How we approach it
Fabs and electronics assembly need water purer than anything they discharge, so the engineering sits on the supply side: RO for bulk rejection, electrodeionisation for continuous polishing, and mixed-bed resin for the final trim to resistivity spec.
We monitor resistivity and TOC continuously rather than by grab sample, because an ultrapure specification has no tolerance for an excursion discovered after the fact, and we build in recovery loops so high-purity rinse water gets reclaimed rather than discharged.
What’s included
01
Multi-barrier purification
RO, EDI and mixed-bed staged so no single unit carries the whole spec.
02
Continuous monitoring
Inline resistivity and TOC tracking, not periodic grab samples.
03
Rinse-water recovery
Spent high-purity rinse reclaimed back to process instead of discharged.
04
Compliance-aware design
Built to the documentation standards pharma and semicon audits expect.
Where it’s used
Common questions
- What resistivity can you guarantee?
- Up to 18.2 MΩ·cm at point of use, verified with continuous inline monitoring rather than periodic sampling.
- Do you validate systems for pharma or semicon compliance?
- Yes, we build documentation packages aligned to the validation standards your audit and quality teams expect.
- Can spent rinse water be recovered?
- In most fabs, yes. High-purity rinse streams are usually clean enough to recover back to process rather than discharge, and we design the recovery loop as part of the system.
Related services
RO Systems for Process & Recovery
High-recovery RO skids for process water, boiler feed and tertiary polishing, with smart anti-scalant dosing, automated CIP and membrane life tracking.
Ultrafiltration Systems
Hollow-fibre UF systems that clarify water down to 0.01–0.1 micron without chemical coagulation, protecting downstream RO from fouling.
Water Treatment Plants
Raw water, DM and softening plants: clarification, filtration and ion exchange, sized for factory floors and multi-site operations.
Get a proposal
