Aqualam Engineering Solutions

Wastewater Recovery

Wastewater Treatment & Recovery

Treatment engineered to recover water for reuse, not just to clear the discharge bar: biological or physico-chemical treatment paired with a membrane-based recovery loop.

Group of water tanks at a wastewater recovery plant

Systems we build

Recovery target
60 – 99%
Technology
ASP/MBR + RO/UF recovery loop
Reuse routes
Cooling · Process · Flushing
Freshwater draw
Reductions of 60%+ seen on installed sites

How we approach it

A compliant discharge and a recovered water economy are two different design briefs. We start from the second one: what fraction of your intake can come back as process, cooling or flushing water, and size the treatment-plus-recovery train to hit that number, not just the legal minimum.

In practice that means an ETP or STP stage feeding straight into RO or UF recovery, with the reject stream routed to further concentration or ZLD where the numbers justify it, so freshwater draw drops and effluent volume shrinks together.

What’s included

  • 01

    Treatment + recovery, one design

    The recovery loop is sized alongside the treatment train, not bolted on after.

  • 02

    Freshwater draw reduction

    Sites on our installed base have cut fresh-water intake by 60% or more.

  • 03

    Reuse-grade output

    Water fit for cooling towers, process makeup or flushing, by design.

  • 04

    Monthly recovery reporting

    Energy, chemical and recovery-ratio numbers tracked and reported, not assumed.

Where it’s used

Textile & apparelPharmaceuticalFood & beverageAutomotiveAny site targeting water balance over discharge alone

Common questions

How is this different from a standard ETP?
A standard ETP is scoped to meet discharge norms. A wastewater recovery system is scoped to maximise the water that comes back for reuse, which usually means adding an RO or UF loop after conventional treatment.
How much freshwater can we realistically save?
It depends on your effluent characteristics and reuse routes, but sites on our installed base have cut fresh-water draw by 60% or more after adding a recovery loop.
Does this lead into Zero Liquid Discharge?
It can. Recovery and ZLD sit on the same spectrum, we can scope a recovery system now and design it to extend into ZLD later as reject volumes and economics justify it.

Get a proposal

Talk to an engineer about Wastewater Treatment & Recovery.

Get in touch